One of the most popular tools for optimally designing the system components of HRES is HOMER (The Hybrid Optimization Model for Electric Renewables), which is designed by National Renewable Energy Laboratory.
HOMER ENERGY, HOMER PRO VERSION 3.7 USER MANUAL, 2016 SOFTWARE
Several software tools are available for this purpose, such as HOMER, HYBRID2, iHOGA, HYBRIDS, RETSCREEN etc. Using the computer simulation, the optimum sizes of the components of an HRES can be determined by comparing the performance and energy production cost for different system configurations. Simulation programs/ Software are the most common tools for evaluating the performance of the HRES. Aladin Zayegh, in Hybrid-Renewable Energy Systems in Microgrids, 2018 4.2.7 Computing tools If the plant was operated over 8000 h a year, on this feedstock it would generate 16,000 MWh per annum. This would result in an electrical output of around 2 MW. If the syngas available for export was used in a gas engine for electricity production, a conversion efficiency of 37% might be assumed. Conservatively 30%–35% of this syngas energy is required to operate the pyrolysis plant, with the remainder available for thermal or electrical power generation. For a standard 4 tons/h (dry basis) pyrolysis plant operating on MGW, syngas with an energy value of 30 GJ/h or 8.3 MW would be produced.
If greater energy production is required (more syngas), the biochar could be partially or completely gasified. Thus each dry ton of green waste will produce 7.5 GJ of energy.
The energy balances show that 41% of the energy in the green waste feedstock was transferred into syngas during the pyrolysis processing. The mass and energy balance results are shown in Table 9 for MGW. A basic mass and energy balance calculation was completed using the experimental results obtained from the analysis of the feedstock and biochars.
0 kommentar(er)
